DEWALT, DCS782N, 18V 305MM MITRE SAW BODY ONLY

This large 12 inch or 305mm diameter saw from operates on just a single 18 Volt XR Lithium-ion battery. This is a compound mitre saw, meaning that you can not only mitre cut and bevel cut, but also combine the two together, for those really tricky moulding cuts. For mitre cutting, there are pre-set detents at common angles to let you quickly get the right angle, and for other angles you can still securely lock the angle in with the flip of a lever. To release the bevel angle, you loosen a large screw on the rear that allows you to do left bevel cuts, and the pull a release to let it swing to the right. There are stops on each side that you can move into place to quickly set a common bevel angle. As with the latest FlexVolt mitre saw, this 18V machine has a regenerative braking function which uses the motor as a blade brake and can recover some of that energy back into the battery, giving you slightly longer between charges. As with all mitre saws, dust extraction is the best option to keep the work area free from chips and sawdust, though a dust bag is included. The DCS782 has wireless tool control (WTC), letting you automatically power on compatible DeWalt dust extractors. There is a cutting capacity of just shy of 7 inches vertical, and 14 inches long horizontal, this gives you the ability to easily cut many common sizes of timber used day-to-day. In order to see where the blade will land, there is a shadow-line caused by an LED light that casts a shadow over the blade that lands on the timber. This shadow shows you exactly where the blade lands because it is made by the blade itself. Features:

• Designed for professional users.
• Doesn't need FlexVolt batteries.
• Runs from any single 18V XR Li-ion battery
• Bevels left and right.
• Mitres left and right.
• Compatible with WTC vacs.