€1,157.00
Large saw with depth.
For a greater cutting depth up to 75 mm. Follows only one line. Accurate to the millimetre and without splinters. With the necessary force for each material – lightweight and easy to handle. And the motor with three bearings including MMC electronics for an exceptional service life. The TS 75 combines considerable power and a light weight in a compact device. Together with the guide rail, the TS 75 ensures flexible, fast and precise work.
The spacer wedge is spring loaded and slides back into the housing automatically when placed on the workpiece. Once the machine is inserted, the spacer wedge moves into the saw groove and prevents the saw blade from getting jammed. This means that the spacer wedge is always on the saw, ensuring safety at all times.
If the saw blade gets jammed, the sliding clutch prevents the saw from jolting back.
The extractor connector, which can be rotated by 360°, makes it exceptionally easy to adjust the dust extractor to suit the working position.
The TS 75 makes precise angle cuts extremely easy. The scribe line corresponds to the cutting edge at all times, even when the saw blade is pivoted. From 0° to 47°, set precisely to the clearly visible scale.
With a cutting depth of 75 mm and a power of 1600 watts, even thick workpieces can be sawed with a single cut. The time-consuming task of machining two sides is a thing of the past. This minimises reworking and saves the laborious process of rotating the workpiece.
For high-quality working results: The guide rail guarantees clean, splinter-free cuts. The TS 75 is fitted with guide jaws that do not require tools to be adjusted, in order to enable the saw to operate without any inaccuracy.
The KickbackStop prevents kickbacks when inserting the saw. Always to hand in the practical holder, it guarantees safe work.
Work adapted to the material. The FastFix spindle stop makes it extremely easy to change the saw blade. This way, you are always working with the right saw blade and sawing at a speed adapted to the material.
The triple bearing of the motor improves the running smoothness and extends the service life.
You can set the cutting depth accurate to the millimetre using the latching depth stop.
With the clip-on splinter guard in combination with the guide rail it is even possible to saw on both sides without splinters. Advantage: No rework and considerably less workpiece waste.
Perfect adaptation to the working material, controlled speed and temperature monitoring. The quick-acting brake improves safety by stopping the saw blade in seconds.
circular saw blade WOOD UNIVERSAL HW 210 x 2, 4 x 30 W36, set-back stop FS-RSP, splinterguard, hex key, WAF 5, plug it-power cable (4 m), Systainer SYS3 M 437
| Product weight without accessories | 6.50 kg |
|---|---|
| Drive type | Mains |
| Transport weight incl. accessories | 10.3 kg |
| Power consumption | 1600 W |
| Idle engine speed | 1350 - 4400 min⁻¹ |
| Diameter of the saw blade | 210.00 mm |
| Angular range | 0 - 47 ° |
| Cutting depth | 0.00 - 75.00 mm |
| Cutting depth | 45° 55 mm |
| Dust extraction connection diameter | 27/36 mm |
| Cable length | 4.00 m |
| Sawing wood: Total vibration average, Ah | 3.40 m/s² |
| Sawing metal: Total vibration average, Ah | 3.50 m/s² |
| Sawing wood: Standards series EN | 62841-2-5 |
| Sawing wood: Uncertainty (noise) K | 3.00 dB |
| Sawing metal: Standards series EN | 62841-2-5 |
| Sawing wood: Uncertainty (vibration) K | 1.50 m/s² |
| Sawing metal: Uncertainty (noise) K | 3.00 dB |
| Sawing metal: Uncertainty (vibration) K | 1.50 m/s² |
| Sawing wood: A-weighted sound pressure level, LpA | 91.00 dB(A) |
| Sawing wood: A-weighted sound power level, LWA | 99.00 dB(A) |
| Sawing metal: A-weighted sound pressure level, LpA | 91.00 dB(A) |
| Sawing metal: A-weighted sound power level, LWA | 99.00 dB(A) |
If you place your order online, we will contact you if any of your items are out of stock with current lead times or alternatives if suitable. For more details see our full Refund and Returns Policy.
Nationwide delivery available, or collect in person at our Wexford store.
Tool Depot are an Irish based company and are the leading stockist of Power Tools in Wexford. We stock a huge range of Power Tools, Hand Tools and accessories from top brands at great prices.
We service what we sell. Expert advice is just a phone call away on 053 9168972.
