Original price was: €369.00.€347.00Current price is: €347.00.
For quick changes between drilling and screwdriving.
Enjoy full flexibility when drilling and screwdriving: the completely electronic torque adjustment, CENTROTEC quick-change system, as well as angle attachment, eccentric attachment and depth stop can handle any drilling or screwdriving task. The combination of the Li-HighPower battery pack and maintenance-free brushless EC-TEC motor means that the T 18+3 cordless drill is light, long-lasting and durable. The cordless screwdriver and battery pack are completely covered with the Festool SERVICE, giving you peace of mind for your day-to-day work. Available in T-design or – depending on personal preference – in the unique C-design as the C 18.
The brushless EC-TEC motor is wear-free and converts the energy from the battery into optimum power with virtually no losses. The electronic motor management also guarantees maximum service life: Microprocessors monitor and control the temperature, voltage and current consumption of the motor, electronics and battery.
The Li-HighPower Compact battery guarantees full power, while weighing considerably less. To provide even more endurance, the brushless and maintenance-free EC-TEC motor only takes as much power as required by each screwing task.
The light T-design, the slender SoftGrip handle and the perfectly located centre of gravity ensure that work goes particularly easily and smoothly.
The screwdriver for Systainer³ products can also be seamlessly integrated into bott vehicle equipment for easy transportation from the workshop to the construction site. Systainer³ products are compatible with one another and can be connected to all previous Systainer generations, mobile dust extractors and many other system accessories, such as roll boards or the mobile workshop.
As with all cordless drills from Festool, the bits can also be inserted in the direct bit holder of the spindle on the T 18+3.
The practical bit holder provides space for up to six bits – magnetically secured against falling out.
The angle attachment is perfect for work around corners and reaching concealed screws at tight angles.
Every screw can be reached with the eccentric adapter.
Fast change between drilling, countersinking and screwdriving: The CENTROTEC quick-change system is a chuck and bit holder in one and, at the same time, 50% smaller and 80% lighter than a standard drill chuck. The hexagonal tools are centred using balls – for optimised power transmission and ten times higher true running.
The chuck with a standard width of up to 13 mm also enables the use of all standard bits and drill bits. Tool-free mounting via the FastFix interface.
Fully electronic torque adjustment and shut-off for optimum power development in all situations. The torque setting for screwdriving is retained, even when drilling takes place at maximum torque.
The integrated LED light permits precise work even in dark corners.
WH-CE CENTROTEC tool chuck, CENTROTEC BH 60 CE Imp magnetic bit holder, FastFix keyless chuck 13 mm KC 13-1/2-K-FFP, bit PZ 2, belt clip, Systainer SYS3 M 187
| Product weight without accessories | 1.00 kg |
|---|---|
| Drive type | Battery |
| Transport weight incl. accessories | 3.6 kg |
| Battery voltage (rated voltage) | 18.00 V |
| Gears | 2 |
| Idling speed, | 1st gear/2nd gear 0 - 450/0 - 1500 min⁻¹ |
| Drilling diameter, wood/steel | 45.00/13 mm |
| Torque adjustment | 1st/2nd gear 0.80 - 8.00/0.50 - 6.00 Nm |
| Max. torque, wood/steel | 35.00/50.00 Nm |
| Chuck range | 1.50 - 13 mm |
| Fastening: Total vibration average, Ah | 2.50 m/s² |
| Drilling in metal: Total vibration average, Ah | 2.70 m/s² |
| Drilling in metal: Standards series EN | 62841-2-1 |
| Fastening: Standards series EN | 62841-2-1 |
| Drilling in metal: Uncertainty (noise) K | 5.00 dB |
| Fastening: Uncertainty (noise) K | 1.50 dB |
| Drilling in metal: Uncertainty (vibration) K | 1.50 m/s² |
| Fastening: Uncertainty (vibration) K | 1.50 m/s² |
| Drilling in metal: A-weighted sound pressure level, LpA | 64.00 dB(A) |
| Fastening: A-weighted sound pressure level, LpA | 68.00 dB(A) |
| Drilling in metal: A-weighted sound power level, LWA | 75.00 dB(A) |
| Fastening: A-weighted sound power level, LWA | 76.00 dB(A) |
If you place your order online, we will contact you if any of your items are out of stock with current lead times or alternatives if suitable. For more details see our full Refund and Returns Policy.
Nationwide delivery available, or collect in person at our Wexford store.
Tool Depot are an Irish based company and are the leading stockist of Power Tools in Wexford. We stock a huge range of Power Tools, Hand Tools and accessories from top brands at great prices.
We service what we sell. Expert advice is just a phone call away on 053 9168972.
