Festool Cordless planer HLC 82 EB-Basic

The handy HLC 82 cordless planer is your reliable companion on the construction site and in the workshop when it comes to quick adjustment work. Chamfering of beams, edge transitions of wooden wallboards, rebates on doors, adjustments to skirting or infill panels: With the cordless planer, you are flexible in your application. You can always rely on maximum power: The HLC 82 works best with the powerful 5.0 Ah Li-HighPower or the 8.0 Ah Li-HighPower battery pack.

Strengths and benefits

• Fast: More speed and flexibility thanks to 2.5 mm maximum chip removal and 25 mm rebate depth.
• 18V Power: Best in combination with the 5.0 Ah Li-HighPower or the 8.0 Ah Li-HighPower battery pack for maximum runtime and maximum power.
• Flawless: Drawing cut and spiral blade for particularly fine surface quality.
• Versatile: Chamfering with three integrated 90° V grooves in the planer foot.
• For large-scale chip removal: Thanks to the two different extraction channels, the planer is also suitable for continuous applications with greater chip removal.
• Flexible: Extractor connector attachable on both sides for convenient working, the suction hose is not in the way.
• Convenient: Removable chamfer adaptor for fast and accurate creation of chamfers for beams and square timbers.
• Handy: Easy guidance of the planer on the workpiece thanks to ergonomic design.
• Quiet: The spiral blade reduces the noise level considerably.
• Precise: Chip depth adjustment (0–2.5 mm) on the dial – simple and convenient, easily accessible, even during planing.
• Compatible: With all Festool 18V battery packs (except Ergopack).
• Powerful: The brushless EC-TEC motor ensures constant power, even at maximum chip depth.
• Efficient: The quick-acting brake brings the planer to a standstill in less than two seconds, thereby minimising the risk of injury and damage to the workpiece.

Main areas of use

• Carrying out quick adjustment work
• Ideal for quickly creating precise and long chamfers on beams and square timbers thanks to the removable chamfer adaptor
• Straightening the edge transitions of wooden wallboards
• Doubling of rafters, adjustment work for older building renovations (roof, dormer, floors, ceiling)
• Adapting stair stringers in an existing context
• Adjustment work on doors, cornices or infill panels
• Wide range of applications due to the 25 mm rebate depth and the three V grooves integrated in the planer foot

Product details

Flawless work results

The HLC 82 works with a pulling cut for a particularly accurate planing result. This is made possible by the spiral blade, which works at an incline and planes the wood in a way that is gentle on both the material and the tool. A further benefit is a planing width of 82 mm for a particularly even result.

Wide range of applications

The rebate depth of 25 mm opens up a wide range of possible applications; even with the rebate depth stop, the maximum rebate depth is still 23 mm.

Removable chamfer adaptor

The wide and stable contact surface of the removable chamfer adaptor enables precise and long chamfers to be created quickly on beams and square timbers.

Precise chamfering

The three different 90° V grooves in the planer foot ensure the feeling of gliding smoothly along rails when chamfering boards and beams – without slipping or running off-course.

Simple and precise chip depth adjustment

The chip depth can be set precisely between 0 and 2.5 mm. The chip depth can also be adjusted and controlled during work.

Two different extraction channels for different applications

The longer extraction channel, which is already fitted, is suitable for planing work with a dust extractor. The short extraction channel is suitable for continuous applications with maximum chip removal, especially where dust extractors cannot be used.

Simple and easy guiding

The soft-grip surface on the handle makes working both horizontally and vertically extremely comfortable. The additional grips ensure an even more secure hold. The low net weight makes handling even easier.

EC-TEC motor

Ensures powerful, energy-saving work and a long service life.

Healthy working environment

The suction hose can be attached to either the right or the left side of the planer.

Security against unplanned switch-on

The safety switch with safety lock prevents the planer from being switched on accidentally. The switch and handle are in a central position – so they are just as easy for right-handed and left-handed users to work with.

Protects the workpiece and blade

The spring-loaded shoe keeps the blade away from the surface. The shoe folds inwards automatically when the machine is set down – even on narrow edges.

Greater flexibility when working

The parallel side fence and the rebate depth stop can be attached to the planer using the guide mounts and the retaining screw. The chamfer adaptor can be attached to the planer via both guide mounts.

Stay connected

With the Festool App, you can check your tool's operating data, get handy tips for using it, and regular software updates will keep your tool bang up to date.

Notes

• note: Use only with the HW 82 SD HLC 82 spiral blade (577999)
• please note: HL 850 planing heads are not compatible

Scope of delivery

hex key, WAF 2,5, short chip channel, Systainer SYS3 M 237

Technical data

If you place your order online, we will contact you if any of your items are out of stock with current lead times or alternatives if suitable. For more details see our full Refund and Returns Policy.


Nationwide delivery available, or collect in person at our Wexford store.
Tool Depot are an Irish based company and are the leading stockist of Power Tools in Wexford. We stock a huge range of Power Tools, Hand Tools and accessories from top brands at great prices.


We service what we sell. Expert advice is just a phone call away on 053 9168972.