SKU
LOCK/JIG

Trend Mortice Lock Jig

Trend Mortice Lock Jig Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates & body.
An auger bit and drill is required to complete deep mortises.

€155.00 €126.02

Trend Mortice Lock Jig

Trend Mortice Lock Jig is a contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.

FEATURES:

Deeper mortises can be achieved with a suitable size of auger bit.
Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
Steel plates & body.
An auger bit and drill is required to complete deep mortises.
For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.

SPECIFICATIONS:

Door thickness min. 34 mm
Door thickness max. 58 mm
Template outer size 234.3 x 59.8 x1.5mm

Includes templates for locks having the following face-plate dimensions:

Metric (Imperial approx.) (D x OL)Template
22.2x156 mm (7/8"x 6 1/8") 1
22.5x152.5 mm (7/8"x 6") 2
25.4x121 mm (1"x 4 3/4") 3
25.4x127.5 mm (1"x 5") 4
25.4x133.5 mm (1"x 5 1/4") 5
25.4x145 mm (1"x 5 3/4") 6
25.4x153 mm (1"x 6") 7
25.4x156.5 mm (1"x 6") 8
25.4x165.5 mm (1"x 6 1/2") 9
25.4x177 mm (1"x 7") 10
25x57.5 mm (1"x 2 1/4") 11 UPPER
26x56.5 mm (1"x 2 1/4") 11 LOWER
25.6x162mm (1"x 6 3/8") 12

Mortice Lock Dimensions:

Imperial (Metric) (D x OL) Template
16x72 mm* (5/8" x 2 7/8") A
16x107 mm* (5/8" x 4 1/4") B
19x78 mm* (3/4" x 3 1/8") C
19x109 mm* (3/4" x 4 1/4") D

*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.

Nationwide delivery available.

Tool Depot are an Irish based company and are the leading stockist of Power Tools in Wexford. We stock a huge range of Power Tools, Hand Tools and accessories from top brands at great prices. We service what we sell. Expert advice is just a phone call away on 053 9168972.

Included with this Trend Mortice Lock Jig is a Guide Bush Collar, 12 x Face Plate Templates, 4 x Mortise Templates and 6 x Spacer Fingers.

Get your Trend Mortice Lock Jig today and get ready to experience performance and quality at its finest.

Write Your Own Review
You're reviewing:Trend Mortice Lock Jig
Your Rating
To Top